Module 1: ROS introduction and workspace setup
Module 2: ROS basics and tools (ROS)
-
Create ROS workspace (9:01)
-
The ROS master and the nodes (23:21)
-
Create a node in C++ (29:19)
-
Create a node in Python (14:28)
-
Create a publisher in C++ (14:31)
-
Create a subscriber in C++ (19:42)
-
Create a publisher in Python (12:48)
-
Create a subscriber in Python and play with Turtlesim (23:31)
-
Introduction on Services (18:01)
-
Create a service server in C++ (20:59)
-
Create a service client in C++ (16:28)
-
Create a service server in Python (11:50)
-
Create a service client in Python (15:07)
-
Create a custom msg (18:13)
-
Create a custom srv (4:43)
-
Final Project with Turtlesim (95:59)
-
ROS parameters (6:08)
-
ROS launch file (10:58)
Module 3: World Modeling and Simulation Environment (ROS & ROS2)
Module 4: Robot Modeling (ROS & ROS2)
-
Introduction to URDF file (7:41)
-
Strategy to model your custom Robot (8:20)
-
Start to create a custom Robot in URDF (12:48)
-
Visualize the Robot in Rviz (13:44)
-
Joint State and Robot State Publisher (10:24)
-
Complete you custom robot (19:59)
-
How to simplify your Robot model (15:05)
-
How to model a gripper as end effector (22:55)
-
How to clone a robot model from Github (33:21)
-
How to clone a commercial robot: Universal Robot 5 (UR5) (25:08)
-
How to setup a commercial Gripper: Robotiq (30:59)
-
Spawn your Robot in Gazebo (11:54)
Module 5: ROS Control (ROS)
-
Introduction to ROS Control (8:17)
-
How to calculate intertia values for your custom robot (22:01)
-
How to configure transmission for the joints of your custom robot (14:57)
-
How to put a Gazebo plugin (14:12)
-
How to create and configure controllers for your Custom Robot Joints (17:08)
-
How to spawn controllers of your robot joint (19:30)
-
How to tune PID Controllers for your Custom Robot Joints (87:26)
-
Forward Kinematics with Custom Robot (9:48)
-
How to use Transform (3:31)
-
Hot to grasp an object in Gazebo without slipping (26:33)
-
JointPositionController VS JointTrajectoryController (12:52)
Module 6: Inverse Kinematics with MoveIt and Pick and Place Application (ROS))
-
Introduction to MoveIt (12:08)
-
Create a MoveIt configuration Package (19:00)
-
Play with Motion Planning and update the MoveIt package (36:37)
-
ROS Control for MoveIt (11:09)
-
Create an Inverse Kinematics node (28:55)
-
How to setup the orientation and position of the end effector (19:30)
-
How to make Collision Objects in Rviz (23:37)
-
How to code Pick and Place (51:06)
-
How to adapt the inverse Kinematics node to another robot (37:30)
-
How to code Pick and Place with Grasp Class
Module 7: Run the Application in Gazebo (ROS)
Module 8: Perception for Robotics with OpenCV (ROS & ROS2)
-
Why Computer Vision in Robotics (20:33)
-
Strategy to integrate perception with robotic arm (14:01)
-
Type of Perceptions: HSV (11:53)
-
Type of Perceptions: SURF (6:21)
-
Type of Perceptions: PCL (4:05)
-
How to deploy a 2D camera (23:52)
-
Get an Image with OpenCV (37:04)
-
Stream the Image with OpenCV (6:15)
-
Edge Detection with OpenCV (46:49)
-
Get the position of the object in the Image (46:03)
-
Convert the object position with the respect of camera_link (80:14)
Module 9: Perception for Robotics with PCL (ROS & ROS2)
Module 10: Pick and Place using camera (ROS)
-
How to tackle this project (9:13)
-
Adapt the Computer Vision node (16:43)
-
Create the service to transform data from camera_link to base_link frame (61:42)
-
Pick and Place with 2D camera (53:54)
-
Pick and Place with Grasp class (36:21)
-
Pick and Place with UR5 and Robotiq gripper in Gazebo / real word (38:53)
-
Pick and Place with UR5 Robotiq gripper and 3D camera (9:58)
Module 11: Waypoints and Optimize the Trajectory (ROS)
Module 12: ROS2 Humble (ROS2)
-
Differences between ROS and ROS2 (10:51)
-
ROS and ROS2 distributions
-
Install and setup ROS2 Humble (14:04)
-
Create ROS2 Workspace (9:19)
-
Install VS code in Ubuntu 22.04 and ROS2 setup (4:18)
-
Create packages and basic node in C++ (37:39)
-
Write a Topic Publisher Subscriber in C++ (37:30)
-
Create packages and basic node in Python (30:00)
-
Write a Topic Publisher Subscriber in Python (21:46)
-
Create Custom Interface (11:47)
-
Write a service in Python (15:38)
-
Write a Service in C++ (17:55)
-
ROS parameters in ROS2 (29:57)
-
Create a Launch file (30:50)
Module 13: Migrate your project from ROS1 to ROS2 (ROS2)
-
Repository of this Module
-
Migration strategy (9:22)
-
Migrate custom robot description package (28:23)
-
ROS2 Control: understanding and deploying Joint Group Position Controller (54:23)
-
ROS2 Control: setup and deploy Gripper Action Controller (16:20)
-
ROS2 Control: setup and deploy Joint Trajectory Controller (12:19)
-
ROS2 Control: Control the robot sending trajectory_msgs from C++ script (11:43)
-
Replicate the .world from ROS1 (8:31)
-
Deploy depth camera and the pick object (25:45)
-
Create MoveIt2 configuration package for a custom robot (55:40)
-
How to interface Moveit2 with Gazebo (18:24)
-
Create an inverse kinematics node with MoveIt2 in C++ (23:39)
-
How to simulate grasping with LinkAttacher in Gazebo (11:38)
-
Pick and place with a Custom robot: Gazebo interfaced with Rviz (30:27)
-
UR5, Depth Camera setup in Gazebo with MoveIt (81:24)
-
Add Robotiq gripper to UR5 and setup in Gazebo with MoveIt (62:50)
-
Setup the world and LinkAttacher for grasping (15:34)
-
Test inverse kinematics with UR5 (20:46)
-
Run Pick and Place with UR5 and Robotiq gripper (8:26)
-
Point Cloud Library and 3D processing in ROS2 (52:12)
-
Pick and Place with UR5 Robotiq Gripper using 3D camera in ROS2 (31:58)
-
Resources and GitHub repository of the master class
-
How to make your packages portable
-
Fixing MoveIt Setup Assistant (MSA) Crash after ROS2 Updates
Module 14: Docker for Robotics (ROS & ROS2)
-
Introduction - Why Docker for Robotics - Installation and Setting up your Environment (22:32)
-
What is Docker under the Hood (13:19)
-
How to Create an Image for simulating UR5 Gazebo with Rviz and MoveIt (50:03)
-
How to run a Container (17:45)
-
Volumes: Making Data Persistent (19:26)
-
Using Docker for Complex Hardware — Isaac ROS RealSense Example (21:10)
-
Multi-Container Robotics with Docker Compose: Connecting Services and Using the Host GUI (33:58)
-
GUI in Docker (for Rviz, Gazebo, rqt) (12:43)
-
Using Docker in VS Code and final wrap-up (13:31)
-
Common Docker Commands Cheatsheet
Module 15: Robotics Applications and LLM [Ollama] Integration in ROS2
-
Creating the ROS2 Workspace & Cloning xarm_ros2 (12:02)
-
Building the Custom Package my_xarm6: Robot, World, and Camera Setup (63:25)
-
Creating the my_xarm6_app Package: First Motion Node (26:46)
-
CNC Motion Node: Drawing Circles and Squares with Constant Orientation (37:50)
-
Blind Pick and Place: Fixed Object Positions (29:03)
-
Vision Integration with OpenCV: Depth Reconstruction via Intrinsics (38:32)
-
Vision-Based Pick and Place + Custom Service Definition (35:17)
-
Introduction to Ollama and LLM Integration (12:17)
-
LLM Task Pipeline: Designing the Action-Oriented Architecture and System Prompt engineering (55:45)
-
LLM-Driven Pick and Place: Updating System Prompt + Vision + Motion Integration (45:48)
-
Test Robotics Tasks with LLM Ollama integrated in ROS2 (21:26)
-
General Task LLM: Unified Prompt and Full Robot Commanding (CNC, pick place with vision, end effector control)) (24:59)
Simulation to Reality: Build real Robotics task with 6Axis Robot (FR3WML + SoftGripper + Suction cup)
-
Simulation to Reality – Building a Real Industrial Robotic Pipeline - Introduction (9:06)
-
Setup comunication between PC and Robot Hardware controller (8:22)
-
Understanding the Robot Driver Layer: How to Interface Any Robot Controller with ROS2 (26:54)
-
How to Create a Bridge to Interface MoveIt with Robot Controller (33:50)
-
Gripper Hardware setup (6:54)
-
Bridging Digital Outputs to ROS2 Gripper Control (20:54)
-
Building a Custom ROS2 Robot Package: Adding a Gripper and Camera to the FR3WML (18:17)
-
Designing a Real ROS2 Robot Architecture with MoveIt (12:21)
-
Integrating a Gripper (SoftGripper) into MoveIt (47:59)
-
Control Robot Speed from ROS2 and MoveIt (24:33)
-
Move the Real Robot with MoveIt Inverse Kinematics (22:42)
-
Hardware Architecture for Pick and Place with 3D Camera (17:31)
-
Jetson Orin Nano Setup for Real-Time RealSense Streaming with Docker (31:24)
-
Software Architecture -- From Camera Streaming to Local AI Inference (29:47)
-
Create the Inference Container on Jetson Orin Nano (YOLO + ROS2) (21:44)
-
3D Pose Estimation with YOLO + RealSense on Jetson (17:56)
-
Handle Real Images noisy and 3D Pose Publishing (17:29)
-
6D Pose Estimation with YOLO + Realsense on Jetson (36:21)
-
Industrial Pick and Place Framework: Bottle from Crate and Capsule on Bottle Neck (29:08)
-
From Monolithic Code to an Industrial Behavior Tree Framework (28:41)
-
Camera Calibration: from simulation to real robot, the hand-eye approach (15:30)
-
From Blind to Vision-Driven Pick-Place (Bin Picking) (19:17)
-
Optimizing the Pick-and-Place: Speed, Smooth Motion, and Architecture (13:46)
-
What You Have Built in the Full Stack Robotics Program
-
Final Reference Lesson — GitHub Repositories and Docker Images
Wrap up and next steps
Additional module to be defined based on student's needs and requests
1 comments